|
 |
Aluminium
pressure die-casting case for street lamp
upper and lower side (GD-AlSi12)
processed weight, ca.3, 98 kg ready.
2 x 1- cav. tool,
Cast manufactured on a 750 tons machine.
Tool per 7.800 kg, 880x1250x930 mm
Tool and components manufacture in China
|
|
 |
Magnesium steering wheel
(GD-MgAlMn.)
weight approx. 850 grams
6 x 1- fold tools
Tool manufacturing in China
Components manufacture in Spain
|
|
 |
Aluminium
pressure die-casting case
(GD-AlSi9Cu3.)
processed, ca.3, 7 kg ready.
1-cav. tool,
Cast manufactured on a 1.250 tons machine.
Tool manufacturing in China
Components manufacture in China
|
|
 |
Cylinder head cover for automotive industry (Isuzu.)
Part gets and poured, finished from GD-AlSi9Cu2
pre-assembled, installation ready delivery
1-cav for 420
tons of cold chamber machine
Manufacturing place tools: Turkey (Izmir.)
Manufacturing place parts: Turkey (Izmir.)
|
|
 |
Aluminium die casting part for a
medical-technology equipment
Endpiece of a movement unit
Manufactured with single-cavity mould on a 750 tons injection
machine
Material: GD-AlSi9Cu3
Part is poured ready, sharpened deburred and for a powder coating
then
In the visible zone with a grain 280
Semiautomatic powder coating
Part weight: Approx. 1100 grams
Place of manufacture of the toolkit: Austria/Switzerland
Place of manufacture of the parts: Pilot series -
Austria/Switzerland
Series: Turkey - Izmir
|
|
 |
Aluminum die casting part for a
medical-technology equipment (radiograph.)
Share for the photo and shielding
of a radiate - unit
Manufactured with single-cavity mould on a 750 tons injection
machine
Material: GD-AlSi9Cu3
Part is poured ready, then works on deburred and CNC
Part weight: Approx. 900 grams
Picture represents the part not deburred
Place of manufacture of the toolkit: Austria/Switzerland
Place of manufacture of the parts: Pilot series -
Austria/Switzerland
Series: Turkey - Izmir
|
|
 |
Aluminum casting part for a
medical-technology equipment (tooth technology.)
Share as an articulation piece of a
propulsion unit
Manufactured with single-cavity mould on a 350 tons injection
moulding machine
Material: GD-AlSi9Cu3
Part is poured ready, then works on deburred and CNC
High tolerance requirements
Part weight: Approx. 900 grams
Picture represents the powder coated part
Place of manufacture of the toolkit: Austria/Switzerland
Place of manufacture of the parts: Pilot series -
Austria/Switzerland
Series: Turkey - Izmir
|
|
 |
Aluminium die casting part for a
medical-technology equipment (radiograph.)
Partto carry control elements
Manufactured with single-cavity mould on a 250 tons injection
moulding machine
Material: GD-AlSi9Cu3
Part is, poured ready deburred and CNC then work and textured
Material gepulvert.
The hull is established from free-cutting steel and then nickel-plated
hard.
Part weight: Approx. 450 grams
Picture represents the ready coated part
Place of manufacture of the toolkit: Austria
Place of manufacture of the parts: Pilot series - Austria
Series: Turkey - Izmir |
|
 |
Aluminium
burner case of motor vehicles heater.
Part is processed ready and checked for tightness to 100 %.
Part must micro porosity be "free of shrink holes and air bubbles"
1-cav. tool with 7 under cuts made with 5 slides part weight 900
grams
Material: GD-AlSi12 (Cu.)
Manufacturing place tools and parts: Taipei (R. of China)
|
|
 
|
Case for 8 "HDD.
Part is processed ready and delivered with and without
surface protection alternatively.
A surface termination is, (necessary powder coating.)
is the mechanical processing executed only after the coating?
the cases may nevertheless show no damages to the surface
|
|
 |
Aluminium burner
case of motor vehicles heater.
Part is processed ready and to an end of the surface
protection
passivate in chromic acid
|
|
 |
Aluminium piston
established in the pressure die-casting
proceedings
for compressor.
(Air conditioning engineering.)
Part is processed poured and ready.
1-cav. tool with 2 back slices ejected with 2 slides
Part weight 250 grams
Material: GD-AlSi12
Manufacturing place: Turkey
Supplier countries: EU
|
|
 |
Aluminium connection piece for the
furniture industry.
Flat ribbon steel welded on as a turned part originally
designed we could the part in the pressure die-casting proceedings
considerably more favourable conditions and with fundamentally good
Offering and manufacturing quality. Part is delivered finishedly.
|
|
 |
Aluminium
adjustable leg for the
furniture industry.
Part is (black chromium-plates, res. with cadmium zinc coating,
with surface delivered manufactured and mounted installation ready.
1+1 - cav. tool without slides. (And clamp subdivides.)
Part weight of the group of 275 grams put together
Material: GD-AlSi9Cu3
Manufacturing place: Izmir (Turkey.)
|
 |
Aluminium back support for the furniture industry.
(Pipe
coupling between the chair shell and the armrest of the chair.)
Part is processed poured and ready
A part of the output is delivered powder coating capably
part is high gloss polished and foil packed delivered in "Air
Bubble" further.
1-fold tool with 2 slides
Part weight: 2.200 gram
Material: GD-AlSi9Cu3 (with higher strength.)
Tool weight: 1.980
Manufacturing place: Izmir (Turkey.)
Supplier country: Germany
|
|
 |
|
 |
Aluminium case for transmissions.
3, sizes of 780 to 2.100 gram were different
Parts get poured, deburred and surfaces treated.
After the surface termination the processing is carried out.
A surface termination is, (necessary powder coating.)
is the mechanical processing executed only after the coating?
the cases may nevertheless show no damages to the surface
1-cav. tool with 2 slides
2-cav
tool. with 3 slides
Parts weight 780 bis 2.100 Gr.
Material: GD-AlS9 Cu3
Manufacturing place: Cigli/Izmir (Turkey)
|
 |
Aluminium case for a generator (armed forces.
Use.)
Part is processed poured and ready
1-cav tool without slides.
Part weight 2.600 gram
Material: GD-AlSi12 (Cu.)
Manufacturing place: Turkey
Supplier country: The USA
(Representation with gates and air beans)
|
|
 |