 |
LCD TV rear 1050x670x135 mm Manufactured from ABS - V0 Wall thickness 2.5 to 3 mm Tool measurements 1-fold 1850 x 1200 x 780 mm Tool weight 12.8 tons of weight, manufacturing in one Hai Tian 1.650 tons machine Sprue is carried out via 7 Yudo Hotrunner nozzles |
 |
Tool for door interior trim Tool: In front of tempered steel (NAK 80, HRc 38 ... 42) Construction time period up to pilot series parts 12 weeks Hot runner Tool measurement: 1600x1400 mm Manufacturing place tools: Dongguan (P.R. of China.) Share manufactured from PP unamplifiedly Components manufacture: P.R. of China |
 |
Injection molding toolkit for motor vehicle (estate car.) Uses of tools: Hardened 1.2379 and 1.2344 ( HRc 48-52) Construction time period up to pilot series parts 4 weeks One 1+1fold and one 1-fold tool with hydraulic operated slides - actions vigour cast Tool measurements different Manufacturing place tools: Shenzen (P.R. of China.) Share 15% GF manufactured from PBT+; Components manufacture Shenzhen |
 |
(Animation) of the CAD construction for the collision analysis with much further electric one Components on different circuit boards, far for the simulation and which ready part. So we do not manufacture only tools but we can do everything take care of it what should or must be checked before the beginning of the tool manufacturing, around the former to get class parts from our tools. Parts are manufactured one 1-fold form, two parts from ABS higher temperature constant Vicat A 105° degrees Celsius into ever Place of manufacture of the toolkit: Shenzhen (P. R. of China.) Place of manufacture of the parts: Series - Shenzhen |
 |
Everything must, today, the wish expressed will always be banner at home appliances once in a while, too, that the technical processes must be visible, not only the processes in an enterprise or a bureaucracy. So transparent ABS which offers both a very good permeability to light and beats the older transparent materials also pricewise is always fairly often used of us. Tool manufacturing: Shenzhen Components manufacture Dongguan |
  |
(Gear wheel.) Gear with inside and external gearing The gearing is a customer design outside the standard norms. Tool: 1 subject Manufacturing place: Shenzhen - BaoAn P. Republic of China |
 |
Parts-manufacturing (3 x clock.) Once something else: In 3 different proceedings we produce which, a watchcase can produce res. A. mime parts as in very high precision and low reworking B. as an investment casting part middle precision and a little higher reworking C. as a plastic part, manufactured with special synthetic materials of very high strength and toughness without any reworking and also at the most cost-effective one |
 |
(Keyboard.) Keyboard in the increase colour injection moulding as an example. The example made out is splashed installation ready, 3 colours injection moulding 2 compartment tool There are many possibilities of the tool manufacturing which must be chosen depending on the required quantity, however. It is of course also possible at these proceedings to connect different materials to a part. Inside in a second process with a TPE with only 50 Shore A is therefore for example a motor vehicle glove compartment from ABS or PP, this then lined to reach such a very high sound insulation. |
 |
Die Teile werden alle schraubenlos montiert, inklusive der Leiterplatten und Sensoren nur mit Schnapp Verbindungen |
 |
The tools be 2 or 4-fold for the gear wheels and smaller portions, the tools of the larger portions are only 1-cav. All gear wheels are manufactured in POM |
 |
Most exact plastic parts from PPO. Materials a little expensive for it you voted because the parts in very high precision at the disposal having to stand. The toolkit consists of 8 tools. |
 |
Valve body (2-part) for control engineering
manufactured ausPA66 with 43% GF in different sizes
Splashed with the connections pre-assembled, pressure tested,
Bar must be proved against pressure 50 celebration at 10 parts per
rank.
Manufacturing place: Shenzen - BaoAn
P.Republic of China
MORE INFORMATION!
|
 |
From this gets to a toolkit, parts worldwide at
hairdresser shops from sold.
Altogether 18 tools cover housing manufactured from
heat-resistant PBTP Single-cavity mould with uses of changes Thin-wall part, wall thicknesses partial only 0.5 mm Poured repeatedly, 8-fold tunnel gate Part weight: Approx. 140 grams Part became before the tool manufacturing and for the specification of the sprues expecting the delay etc. with Mold Flow classed Place of manufacture of the toolkit: Shenzen (P. R. of China.) Place of manufacture of the parts: Pilot series - Shenzen Series: Turkey - Izmir |
 |
From this gets to a toolkit, parts worldwide at
hairdresser shops from sold.
Altogether 18 tools cable specifications from high-temperature
Multiple die belts. Very thin-wall parts, wall thicknesses partial only 0.7 mm Self not dividing off tunnel gate to the part stability, poured repeatedly Part weight: Approx. 2 to 6 grams Place of manufacture of the toolkit: Shenzhen (P. R. of China.) Place of manufacture of the parts: Pilot series - Shenzhen Series: Turkey - Izmir |
  |
Very thin-wall parts, wall thicknesses partial only 0.7 mm Self dividing tunnel gate off, poured repeatedly Part weight: Approx. 2 to 6 grams Place of manufacture of the toolkit: Shenzen (P. R. of China.) Place of manufacture of the parts: Pilot series Shenzen Series: Turkey - Izmir |
 |
From this gets to a toolkit, parts worldwide at
hairdresser shops from sold.
Altogether 18 tools case pot manufactured from PBTP with 30% glass fibre,
UL VO listed single-cavity mould. Very delay critical parts multiple self dividing tunnel gate off For the compliance with the plainness request 0.3 mm of cooling in freezing tool Part weight: Approx. 130 grams Parts are partly delivered pre-assembled Contribution of threaded bushings can be carried out with different methods: So screwing in mechanically, ultrasound and inductive Place of manufacture of the toolkit: Shenzhen (P. R. of China.) Place of manufacture of the parts: Pilot series - Shenzhen Series: Turkey - Izmir |
 |
Plastic parts from ABS for TV remote control, tool prints and pre-assembles 4+4 foldly, painted wetly with Hot runner gates Manufacturing place tools: R.o. China (Kao Shiung/Tainan.) Manufacturing place parts: Turkey (Manisa.) |
 |
Membrane keyboard for machine control as ready, sales capable Unit, plastic housings, foil, circuit boards with switching components and plugs installation ready examined and packed. Manufacturing place for tools: Turkey (Izmir.) Manufacturing place for the device: Turkey (Manisa) |
 |
Plastic parts from PBTB for a light switch 4+4fold tool with pin gates Manufacturing place tools: Turkey (Izmir.) Manufacturing place parts: Turkey (Bursa.) |
|
|
Toolkit for a telephone (design by Porsche.) Material: Parts are splashed from ABS. The toolkit consists of 8 tools 1 cav. to 40 cav. Become all buttons with 2 color injection - revolving moulds Produced. (Multiple tools.) The tools were produced in Tainan or Taipei, exception the case of top. All parts being manufactured in Taiwan, becoming cases and earpieces paint. The final assembly of the telephone is carried out in Shenzhen. |
 |
12-part toolkit for a coin counter Material: Parts become mainly glass balls from ABS refreshment splashed. The parts from POM shown different bulking agents. The toolkit consists of 8 tools 1 cav. to 4 cav. (Worms and gear wheels). Both the part shown on the left and the snail in the middle become with one placing next to each other parts made of steel 1.405 res. brass manufactured. All tools and the pilot series were manufactured in Shenzhen, the batch production of the parts in Bursa (Turkey). |
|
|
Drink strap (24 bottles.) Part is injected and delivered by container freight (ship) to the customers. 1-fold tool with 6 slides and two sloping slides Tool weight 4.700 kg Hot runner 4-fold distributor System Hasco Part weight 2.300 gram Material: High-density - PE Manufacturing place: Turkey (Izmir.) Supplier countries: Tunisia, Algeria etc.. |
|
|
Injection molding tool for "gear wheel with an angle" Uses of tools: Hardened steel 1.2344, HRc 50 .. 55) Construction time period up to pilot series parts 12 weeks 4-fold tools with out trick unit, hot runner - distributor PIM PONT GATE- , Tool measurements: 246x246x420, weight: 280 kg Manufacturing place tools: Taipei (R. of China.) Parts manufactured from POM, components manufacture in Turkey |
|
|
Toolkit for nameplates Material: Parts are splashed from polystyrene and ABS. The parts can in different colours. Surfaces and also you deliver metallized dully or high gloss. The toolkit ever consists tool of 5 tools 1 foldly with PIN POINT RUNNER with different names for a product. Place of manufacture of the toolkit: Shenzen (P. R. of China.) Place of manufacture of the parts: Shenzen |
 |
Plastic parts from ABS/PC blend for Toyota Corolla. 4-fold tool with pin gates Manufacturing place tools Turkey (Izmir.) Manufacturing place parts: Turkey Bursa |
|
|
Toolkit for phototechnology (Carl Braun Nuremberg.)
Material: Parts are injected from ABS and partly painted.
The toolkit consists one 1-cav tool of ever
PIN POINT RUNNER self-cutting off
Subdivide, top, magazine leadership and condenser flap.
Place of manufacture of the toolkit: Shenzen (P. R. of China.)
Place of manufacture of the parts: Pilot series - Shenzen
Series - Turkey - Izmir |
|
|
Toolkit for television engineering (Loewe Kronach.) Material: ABS V0 bezw turns into parts. Polystyrene V1 splashed and with the buyer partly painted. The toolkit ever consists of 3 tools 1 foldly Tool with a 4 to 6 hotbox nozzles Place of manufacture of the toolkit: Taipei (R. of China.) Place of manufacture of the parts: Pilot series – Kaoshiung Series - Germany |
