 |
Stamping part made with an progressive tool.
Customer asked us to modify a standard part exactly
to here need. The terminal is made in bronze, parts
weight is less than 1gram, material thickness 0,3 mm
Parts and tools are made in Shenzhen P.R. of China
|
 |
Stamping part (progressive tool) made of bronze
Material thickness 0.75 mm
The part is folded 4 times and must meet highest tolerance
requirements despite the complicated convolution.
Tool and components manufacture is Dongguan
P.R. of China
|
MORE INFORMATION!
|
Punching parts, (frame) from 0.3 mm of a thick tin-coated
steel sheet.
For LCD monitors
frame in the sizes 7 "to 14".
See details
|
 |
Stamping part made with progressive tool,
material of part
stainless steel 1.4301
Parts weight less than 1 gram.
Material thickness 1,2 mm
Tools and parts are made in Shenzhen
P.R. of China
|
 |
Stamping tool (Progressive tool) parts
(commutator) made in bronze.
The 3 commutator arms attached to the extent must
be exactly adjusts be in high of 0,03 mm
The adjustment will be made manually, by hand,
the adjustment values will be checked contact less
Parts weight is less than 1 gram
Tools and parts are made in Shenzhen
|
 |
Stamping
loudspeaker grilll
(progressive
tool)
from
a
prepunched
steel sheet.
Use as bars for motor vehicles loudspeaker and motor
vehicles auxiliary speaker.
Progressive tool with bend station
Manufacturing place: Shenzen (P. R of China.)
|
 |
Different stamping for the fine equipment
engineering.
Material: Pre-galvanized steel sheet (progressive
tool.)
Almost all parts become spot-weldedly and in front
of the
welding units
and fulfilling around the requirement to the
demanded rectitude
orientedly after that.
Fields of application. Computer, printer,
photocopier etc..
Manufacturing place: Shenzen (P. R of China)
|
 |
Stamping for telecommunications equipment
Stamping for case half for answering machines, parts
from coated
Aluminium. The surface is visual very attractive,
parts can in
different structures and colours and materials be
manufactured.
Manufacturing place tools and parts Shenzhen (P. R.
of China.)
|
 |
Different stampings for the phototechnology.
Material: Aluminium in different surface qualities
It is unusual feature at the punching events that be allowed
to the
parts - be damaged to surfaces neither at the pressing nor
when turning.
Become without exception this kind of stampings with
protective
foils delivered in the surface qualities:
Coated high gloss and black dully.
Manufacturing place: Shenzhen (P. R of China.)
|
 |
These confiscated
tubes are from the furniture area,
we manufacturing these in many moulding and diameters.
As a confiscated tube with and without bends and
different surfaces, inclusive assembly cultivation parts
refinish.
Manufacturing place: Kemalpasha Izmir (Turkey.)
|
 |
These also are from the
furniture area
Tube welded structures.
We put special value the welding on and/or
Joints in the visible area and the surface terminations,
as chrome, water paints or powder coats.
Manufacturing place: Cigli - Izmir (Turkey)
|
 |
Part for the installation into hydraulic systems
for lorries and also tippers
Toolkit altogether 6 tools
Manufactured made of steel 1 mm, DIN EN 10130-99,
broader manufacturing possibilities are
Parts into aluminium and into high-grade steel
Toolkit from 6 to 8 tools
Part weight: Approx. 150 to 400 grams
Place of manufacture of the toolkit: Cigli - Izmir (Turkey.)
Place of manufacture of the parts: Pilot series - Turkey
Series: Turkey - Izmir
|
 |
Divide for the installation into hydraulic systems
Lorries and also tipper
Toolkit altogether 8 tools
Manufactured made of steel 1 mm, DIN EN 10130-99, further
Manufacturing possibilities are parts
into aluminium and into high-grade steel
Toolkit from 9 tools
Part weight: Approx. 150 to 400 grams
Place of manufacture of the toolkit: Cigli - Izmir (Turkey.)
Place of manufacture of the parts: Pilot series - Turkey
Series: Turkey - Izmir
|
 |
Check valves altogether 18 tools
Membrane plate, this one together with a rubber membrane
when
Mm serves pistons for the regulation manufactured of steel
4,
DIN EN 10130-99 toolkit from 6 to 8 tools
Very tolerance critical part with a CNC post-processing
some positions
Part weight: Approx. 1100 grams
Place of manufacture of the toolkit: Cigli - Izmir (Turkey.)
Place of manufacture of the parts: Pilot series - Turkey
Series: Turkey - Izmir
|
 |
From a toolkit
Check valves altogether 18 tools
Diaphragm ground, this one together with the diaphragm
bonnet and the membrane plate one
a complete pneumatic system represents.
Preconditioned galvanic ally of steel 4 mm, DIN EN 10130-99,
manufactured, powder-coated
100 Micron, least claim of 500 hour Salt spray tested
according to DIN 50021 salt
Toolkit from 6 to 8 tools
Tolerance critical part with a CNC post-processing at some
positions
Picture shows possibilities of a rough cut
Part weight: Approx. 2600 grams
Place of manufacture of the toolkit: Cigli - Izmir (Turkey.)
Place of manufacture of the parts: Pilot series - Turkey
Series: Turkey - Izmir
|