 |
Case with different levers assembled as a trigger element
Toolkit consisting of 4 tools 2-and 4-cavity. Parts are ready casted and assembled. The surface of the case must be brightly galvanized. Material for these parts: GD-ZnAl4Cu Production place tools and product: Izmir and Manisa (Turkey) |
|
|
Small zinc casting parts
Tools for hot chamber die casting machines with a very short cycle time depend on part size, between 5 and 25 seconds. Tools are interpreted mainly as multiple cavity tools. 4 ... 24 cavity. Parts are delivered ready for assembling, but preferably all parts we assemble directly to the required groups and devices. Part weights approx. 0.5 to 40 gram Production place tools and parts: Izmir (Turkey) |
|
|
Mounting lever for lamps etc. (furniture industry)
1- cavity mould with 3 slides. A slide for the very expensive and complete rips going about the complete length of part. A slide for the bearing area (on the right) and a further one for a cable run (on the left) The part we delivered ready finished. Delivering possibilities: ready prepared for coating, wet painted, powder coated and chromium plated. We manufacture similar parts also into aluminium at practically the same strength values and an almost identical surface quality at fundamentally lower weight and costs. Part weight: approx. 900 grams in Zinc and approx. 260 gram in GD-AlSi9Cu3 Production place tools and parts: Izmir (Turkey) |
